Installing a child seat – HONDA 2010 CR-V User Manual

Page 50

Advertising
background image

Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for CHildren) at the rear
seats to secure a child seat in any
seating position: one in each outer
seating position, or one in the center.

The five lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.

The location of each lower anchor is
indicated by a small button above the
anchor point.

When you install a child seat in the
rear center seating position, use the
center lower anchors as shown in the
illustration. To install a child seat in
either outer seating position, use the
outer lower anchors. You can install
up to two child seats at a time using
the outer lower anchors.

Do not attach two child seat
connectors to a single lower anchor
at a time.

Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.

Store the seat belt buckle or
tongue in the storage pockets.

To install a LATCH-compatible child
seat in either of the rear outer seats:

1.

2.

Installing a Child Seat with
LATCH

Using the Outer LATCH

Installing a Child Seat

44

LOWER ANCHORS FOR OUTER LATCH

BUTTON

LOWER ANCHORS FOR
CENTER LATCH

OUTER LOWER ANCHORS

09/07/29 20:30:05 31SWA630_049

Advertising