Daewoo DCR-9120 - Manual (Page 14)

25
VCR
O
per
ation
24
More Functions
Clock / counter display
Remaining time and cassette length
Searching a recorded program with index
Accessing counter zero position
Station names
Sorting programme locations
Clearing programme locations
Tuning in New Stations
■ If your player is showing no station name or is showing a station name incorrectly, you can correct this.
Call this menu (just see the previous page),
if it isn't displayed.
Select NAME position.
Press the [0] button to change the given name.
Or press the [1] button to create the station name.
1
Either select the name from the stored list or you create
the station name and enter a 4-digit name.
Change the letters with the […/†] buttons, move to the
next letter with the [œ/√] buttons.
2
Store and exit. 3
MANUAL SET
…/†SELECT
OK:CONFIRM SETUP:END
PR01 ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
MANUAL SET
…/†: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM SETUP:END
PR 01
RECEPTION AERIAL
AUTOSEARCH CH01
FINE TUNING
DECODER
ON
NAME _ _ _ _
MANUAL SET
…/†: SELECT CHARACTER
œ/√: SELECT POSITION
OK:CONFIRM SETUP:END
PR 01
RECEPTION AERIAL
AUTOSEARCH CH_ _
FINE TUNING
DECODER
ON
NAME O_ _ _
If the location numbers used for programmes stored in your TV and player are different, you can change them on the player. To do
this, move the stations to the right numbers, until they are arranged the way you want.
1 1
Call the player’s "SETUP",
choose "PR PRESET" then "PR ALIGN".
2 2
Select the programme to swap.
Confirm by pressing OK button.
Move the station to the desired location number.
Confirm by pressing OK button.
1 1
Call the player’s "SETUP",
choose "PR PRESET" then "PR ERASE".
2 2
Select the station (location number) you want to clear.
Review the picture by pressing [œ ] button.
Clear by pressing OK button.
PR ERASE
…/†:SELECT
œ :PR VIEW
OK:ERASE SETUP:END
PR ALIGN
…/†ALIGN
œ :PR VIEW
OK:CONFIRM SETUP:END
PR01ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR01 ARD PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
■ The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The
counter does not count unrecorded parts of the tape.
■ If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Each time you press [DISPLAY] button,
1x: Time and date+current status
Time and date
2x: Counter+current status counter
3x: disappear.
But if you press [CLK/CNT] button, clock and counter on display window will change
each other.
• If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time.
• In case that the timer recording information is inputted in the received broadcasting signal , press the button to display the
VPS/PDC icon.
STOP SP PR01 ARD
14:00 08/06 E180 00:48
STEREO ON
V
When you want the player to show the time remaining from the current player tape position (to find out if there is
sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting this function
until you reach the correct length.
Call the player’s "SETUP", choose
"TAPE CONTROL"
• Remaining time display is only
possible when the cassette is
loaded.
TAPE CONTROL TAPE REMAIN
E-240 01:27
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX- E-180
E-240
E-300
…/†:SELECT
OK:CONFIRM SETUP:END
…/†:SELECT
OK:CONFIRM SETUP:END
The player will wind to the position 0:00:00 and stop.
REW SP
GO TO ZERO
0:02:13
When you record a program, the VCR places an index mark at the start
of the recording.
To search fo an index mark
1. Call the player’s "SETUP", choose "TAPE CONTROL"
2. Choose index + to search forward or index - to search backward.
The VCR will locate your index mark and begin playback.
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
…/†:SELECT
OK:CONFIRM SETUP:END