HuddleCamHD 3x Wide - Manual (Page 7)

Ver 1.2 1/24/15
2. Rear View………………………………………………………………………………………….
6. Power Switch
Power On/Off button.
7. DC IN 12V Socket
Only use the Power Adapter supplied with this camera.
8. IR Receiver
To receive IR remote controller signals.
9. IR Selective Switch
When using only one remote to control more than one camera, this switch will
assign a unique ID to each camera.
10. VISCA IN Port
For hard wired remote control from a 3 rd party PC, joystick, etc...
11. VISCA Out Port/RS485