Hybrid Audio Technologies Imagine Series Subwoofer - Manual (Page 5)

I6SW-V2 I8SW I10SW I12SW-V2
Overall Diameter φ168 mm
(6.6-inch)
φ206 mm
(8.1-inch)
φ256 mm
(10-inch)
φ309.5 mm
(10.77-inch)
Mounting Depth 85 mm 102 mm 130 mm 127 mm
Bolt Circle Diameter φ160 mm φ192 mm φ248 mm φ294 mm
Mounting Hole φ148 mm φ184 mm φ235 mm φ283 mm
Pnom Rated Power Input (AES Standard) 125 watts 150 watts 175 watts 225 watts
Pmax Rated Power Input (AES Standard) 250 watts 300 watts 350 watts 450 watts
Frequency Response (+/- 3dB) 32 - 800 Hz 30 - 800 Hz 28 - 800 Hz 27 - 1000 Hz
Efficiency 2.83V/1 meter 88.6 dB 90 dB 91 dB 91.5 dB
Mms 56.6 g 63.5 g 88.5 g 171 g
Cms 308.9 um/N 310 um/N 285 um/N 202 um/N
BL (T*m) 17.681 13.3 13.6 16.4
Voice Coil Diameter 50 mm (2-inch) 50 mm (2-inch) 50 mm (2-inch) 50 mm (2-inch)
Impedance 4 Ω 4 Ω 4 Ω 4 Ω
DC Resistance 3.9 Ω 3.8 Ω 3.6 Ω 3.6 Ω
Fs (Free Air) 38 Hz 35 Hz 30 Hz 27 Hz
Qms 8.077 5.5 5.65 7.0
Qes 0.169 0.29 0.34 0.39
Qts 0.165 0.27 0.32 0.37
Xmax (Two Way) 12 mm 16 mm 18 mm 24 mm
Vas 7.263 L 18.5 L 49.5 L 71 L
Le 1.42 mH 1.52 mH 1.48 mH 1.56 mH
Sd 12,868 mm 2 20,612 mm 2 34,636 mm 2 49,876 mm 2
Imagine
Subwoofers
Specifications &
Parameters
† Typically, in-car response including
vehicular “cabin gain”, or the gain
expected with subwoofer(s) installed in
the vehicle, will result in an extended
subbass response. This is a result of
these frequencies being below the
lowest resonance in the vehicle (typically
around 50-70 Hz in most vehicles). In
more practical terms, install the Imagine
subwoofer(s) into your vehicle and
you will see a dramatic improvement
in subbass and midbass output, much
more so than just simply listening to the
Imagine in a large room, or worse yet,
“free air” (we don’t recommend even
trying the Imagine subwoofers in “free
air” without some form of recommended
enclosure).
© Hybrid Audio Technologies • Cumming, GA • 770.888.8200 © Hybrid Audio Technologies • Cumming, GA • 770.888.8200 8 9