Initiate graphic adapter, Internal graphics mode select, Dvmt mode select – IBASE MI889 User Manual
Page 41: Boot display device, Flat panel type, Spread spectrum clock
BIOS SETUP
MI889 User’s Manual
37
Initiate Graphic Adapter
Select which graphics controller to use as the primary boot device. This option,
by default, is set to IGD.
Internal Graphics Mode Select
Use the feature to set the amount of system memory to be used by the Internal.
graphics device. expansion cards that require a specified area of memory to work
properly.
BIOS SETUP UTILITY
Chipset
Video Function Configuration
Options
Fixed Mode
DVMT Mode
<- Select
Screen
↑↓ Select
Item
+- Change Option
F1 General
Help
F10 Save and Exit
ESC Exit
DVMT Mode Select
[DVMT Mode]
DVMT/FIXED Memory
[256MB]
Boot Display Device
[CRT]
Flat Panel Type
[1024x768]
Spread Spectrum Clock
[Disabled]
DVMT Mode Select
Select the control mode of memory built-in graphics capabilities. This option, by
default, is set to DVMT Mode.
DVMT/FIXED Memory
Sets the maximum memory size assigned to the integrated graphics capabilities.
This option, by default, is set to 256MB.
Boot Display Device
This option is used to select the display device used by the system when it boots.
Flat Panel Type
This option is used to select the type of flat panel connected to the system.
Options include: 640x480 / 800x600 / 1024x768 / 800x480 / 1280x768 /
1280x800 / 1280x600.
Spread Spectrum Clock
By default, this field is set to Disabled.