IBASE SI-28 - Manual (Page 25)

25
APIC Mode
APIC stands for Advanced Programmable Interrupt Controller. The default setting is
Enabled.
MPS Version Control for OS
This option is specifies the MPS (Multiprocessor Specification) version for your operating
system. MPS version 1.4 added extended configuration tables to improve support for
multiple PCI bus configurations and improve future expandability. The default setting is 1.4.
OS Select for DRAM > 64MB
This option allows the system to access greater than 64MB of DRAM memory when
used with OS/2 that depends on certain BIOS calls to access memory. The default
setting is Non-OS/2.
HDD S.M.A.R.T. Capability
By default, this field is disabled.