IBASE FWA8308 - Manual (Page 31)

30
Boot Settings
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Boot Configuration
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
Setup Prompt Timeout 1
Bootup NumLock State [On]
Quiet Boot [Disabled]
Fast Boot [Disabled]
Boot mode select [LEGACY]
FIXED BOOT ORDER Priorities
Boot Option #1 [Hard Disk]
Boot Option #2 [CD/DVD]
Boot Option #3 [USB Hard Disk]
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
[USB CD/DVD]
[USB Key]
[USB Floppy]
[Network]
► CSM16 parameters
Setup Prompt Timeout
Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.
Bootup NumLock State
Select the keyboard NumLock state.
Quiet Boot
Enables/Disables Quiet Boot option.
Fast Boot
Enables/Disables boot with initialization of a minimal set of devices required to launch active boot option. Has no
effect for BBS boot options.
Boot Option Priorities
Sets the system boot order.
CSM16 parameters
This section allows you to configure the boot settings.
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
CSM16 Parameters
CSM16 Module Version 07.70
GateA20 Active [Upon Request]
Option ROM Messages [Force BIOS]
INT19 Trap Response [Immediate]
GateA20 Active
UPON REQUEST: GA20 can be disabled using BIOS services
ALWAYS: do not allow disabling GA20; this option is useful when any RT code is executed above 1MB.
Option ROM Messages
Set display mode for Option ROM
INT19 Trap Response
BIOS reaction on INT19 trapping by option ROM:
IMMEDIATE: execute the trap right away.
POSTPONED: execute the trap during legacy boot.