IHSE USA 471 Series Repeater/Cross- Repeater - Manual

REPEATER/CROSS- REPEATER
Rev. : 09/25/2012
1
Welcome to the Repeater/Cross- Repeater Family!
Thank you for purchasing a Repeater/Cross- Repeater! We appreciate your business, and we
think you’ll appreciate the many ways that your Repeater/Cross- Repeater system will save
you money, time, and effort.
That’s because our Repeater/Cross- Repeater allows, to double the total allowed distance of a
DVXi KVM Extender system for remotely locating a console (DVI-monitor, keyboard and
mouse).
Wherever long distances are usual, e.g. airports, industrial plants, call- centres or in
distributed computer centres, the Repeater/Cross- Repeater is the best way, to solve all
problems in remotely locating your console. 6 different types are available: There are three
types for repeating the signals and doubling the distance and three types to extend the
distance and simultaneously convert from one medium to another (e.g. CATx to Multimode).
This manual will tell you all about your new Repeater/Cross- Repeater, including how to
install, operate, and troubleshoot it. For an introduction to the Repeater/Cross- Repeater, see
Chapter 2. The Repeater/Cross- Repeater product codes covered in this manual are:
Repeater Devices
K471-CT: CATx Repeater to double the distance to up to 280m
K471-MM: Multimode Repeater double the distance to up to 800m
K471-SS: Singlemode Repeater double the distance to up to 20km
Cross- Repeater Devices
K471-CM: CATx/Multimode Cross Repeater; distance CATx up to 140m, Multimode
up to 400m
K471-DM: CATx/Multimode Dual Cross Repeater; distance CATx up to 140m,
Multimode up to 400m
K471-CS: CATx/Singlemode Cross Repeater; distance CATx up to 140m,
Singlemode up to 10.000m
K471-DS: CATx/Singlemode Dual Cross Repeater; distance CATx up to 140m,
Singlemode up to 10.000m
K471-MS: Multimode/Singlemode Cross Repeater; distance Multimode up to 400m,
Singlemode up to 10km