ikan S200D - Manual (Page 5)

DMX-512 Operating Instructions
1. Channel Setting
Press and hold the “DMX” button so the L.E.D. display
shows “d001”. Under this mode you can press the “Up” or
“Down” button to change the channel.
Ex :d001 for channel No. 1
d002 for channel No. 2
*The max number of channels you can have is 512. This
means you can control up to 512 lights.
2. Dimming Function
When the L.E.D. display shows d001 or L=00 you can press
the “UP” or “Down” button to adjust the brightness of the light.
The display will toggle between L=00 to L=FL.
“FL” refers to Full Power
“00 - 99” refers to the amount brightness
When you press the “Up” button the light gets brighter.
When you press the “Down” button the light gets dimmer.
3. Time Delayed Off Switch
You can press the “F” key to adjust for a time delay when
the power is turned off. When the display shows A.0.01 it
means that after you turn the power off it will wait 1 second
before shutting off the lights.
The “Up” key extends the time and the “Down key decreases
the time.
Ex. A.0.15 means the light will turn off 15 seconds after the
power switch was turned off.
99 seconds is the maximum delay.
DMX Dimmer
Note:
The DMX dimmer only applies to the “D” model Fluorescent light series.
Digital Dimmer Models
Description:
When the power switch is on all the lamps will power on. If you want to dim
the light then press the “up” or “down” key to adjust the brightness. The
display will toggle between L=00 to L=FL.
“FL” refers to Full Power
“00 - 99” refers to the amount brightness
When you press the “Up” button the light gets brighter.
When you press the “Down” button the light gets dimmer.
F D
Up
Function
Down
DMX
IN OUT
Display
F D
IN OUT
Up
Down
Display
All ikan fluorescent lights feature:
- 56Kz flicker free frequency
- Lightweight but durable aluminum construction
- Height adjustable yoke
- Push button dimming
- 5pin DMX-512 models available
- Integrated egg crate / filter channel
- Built in Ballast
- Bulbs and barndoor intensifiers included
Features
3. 4.