ikan PT3500 - Manual (Page 5)

Use the included
5/32 Hex Key to
remove and attach
the Raiser Rods.
PT3500 / PT3700
Location / Studio Teleprompter QUICKSTART GUIDE
713-272-8822 www.ikancorp.com
Attach camera to
camera mount and
slide to best position.
Make sure all thumb
screws are secure.
If you require the camera to
be positioned higher you
can replace the 200mm
raiser bars in place of the
pre-installed 130mm Rods.
STEP 4:
DSLR CAMCORDER