Induction Dynamics C2 - Manual (Page 8)

7
Multi-Channel (Home
Theater) Installation
Speaker Placement
5.1 System
A 5.1 system consists of a front left, front right, surround left, suround right, center channel, and
subwoofer channel. A C2 is intended as a center channel. In a home theater configuration,
the center channel should be centered between the left and right front channels and as
close to listening height as possible, either above or below the screen (preferably below
the screen). The surround channels should be placed to either side of the listening area or
behind the listening area at listening height.
6.1 System
A 6.1 system has the same basic channels as a 5.1 system, with the addition of a rear center
channel placed directly behind the listening area.
7.1 System
A 7.1 system has the same basic channels as a 5.1 system, with the addition of a left rear
surround and right rear surround.
C2 Speaker Connection
Connect the center channel output on your home theater processor or receiver to the binding
posts on the C2 using normal polarity (red to red and black to black).