Infloor Infloorboard II - Manual

INSTALLATION GUIDE
24”
24”
8” ” 4 ” 8 4”
Table of Contents
Page
Introduction 2
Determining Your Heating Requirements 2
Required Heat Output 2
Supply Water & Surface Temperature 2
InfloorBoard II™ & PEX Tubing
Requirements 3
Page
Equipment Required 3
Subfloor Preparation 3
Securing Boards 4
Floating Board Installation 4
InfloorBoard II™ Layout 4
Install PEX Tubing 5
Insulation 6
5/8”
Technical Data
Material: MR-MDF
*Moisture Resistant Medium Density Fiberboard
Width (in.) 24
Length (in.) 24
Overall Height (in.) 5/8
Channel Spacing (in.) 8
Weight (lbs./board): 10
Edge Design: Tongue & Groove
Packaging: 5 Boards per carton
PEX Tubing Req.: 3/8” ASTM F876
January, 2007
Infloor Sales and Service , P.O. Box 4945, 503 Gregg Drive, Buena Vista CO 81211
Phone (800)608-0562 Fax (719)395-3555, [email protected], www.infloor.com