Infloor Radiant Trak - Manual

503 Gregg Dr, Buena Vista, Co 81211 phone 800.608.0562 fax 719.395.3555
RADIANT SIDE TRAK
™
INSTALLATION GUIDE
RADIANT SIDE TRAK ™
(Radiant heating)
provides an alternative method of installation
which conforms to the natural ellipse of the
BPEX or PEX tube deployed under the
subfloor.
These plates are installed facing each
other in the joist bays and as the good
sidewall integrity of the tube exerts its
natural pressure it helps to keep the heating
pipe securely in place. You will
find the possibility of
the tubing walking out over time greatly diminished.
• Reduced installation time as tubing whip is reduced!
• Reliable heat transfer performance!
• Easily stapled or screwed to sub-floor!
• Convenient 4’ plate length with pre-punched holes (10 per plate)!
• The rigid channel construction enables flexible PE-RT tubing to be easily “snapped” into place!
• Available in both 3/8” and 1/2” ASTM sizes!
• Radiant heat means conduction with heat transfer medium
• Good performance means high comfort and economy of operation.