Infloor PAP Press Tool 24535 and 24538 - Manual (Page 3)

3
Operation Instruction for Infloor Sales & Service adjustable Manual Pressing Tools
Infloor Sales & Service provides adjustable manual tools 24535 and 24538. The 24535 is for
pressing fittings from 1/2” to 5/8”, and the 24538 is for pressing fittings from 1/2” to 1”.
Below is the introductions on how to use the Infloor Sales & Service SW adjustable manual
pressing tools 24538with lengthened handles.
The key operation instruction of pressing tool 24535 is similar to 24538 except two points:
The 24538 is for press fittings 1/2” to 1” , and doesn’t need longer handles to deal
with the 1/2” to 5/8“ press fittings but does need longer handles to deal with the 3/4” and 1”
2nd, the pressing jaws used on the pressing tool 24535 are smaller than the jaws on pressing
1, Structure of Infloor Sales & Service adjustable manual pressint tools
Below is the pressing tool picture illustrated with the name of each part/component for pressing
pressing tool head pressing tool handle
Main part names:
1:Screw(M6×25), 2: Pressing tool body, 3: Pin in pressing tool body, 4: Connection block, 5 :Pin 1
in handle, 6: Pin 2 in handle, 7: Screw(M8), 8: Right handle, 9:Left handle, 10: Contact point on
right handle, 11: Contact point on left handle, 12: Lengthened handle, 13: Locking screw(M6×12),
14: Adjusting screw, 15 Connection arm, 16:Butterfly-shape screw (M8).
tool 24538, therefore could not be interchangeably mounted on 24538.
tool 24538, which is simular to 24535 on structure.
1) The 24535 doesn’t need longer handles and is only for press fitting sizes 1/2” to 5/8”.
press fittings.