Interlink Electronics DuraPoint - Manual (Page 5)

Special
Note:
Thank you for purchasing the DuraPoint OEM Module (DOM), the durable
pointing device designed to operate in harsh environments. The module has been
designed to be reliable, rugged and easy to integrate. It is the ideal computer cursor-
control solution for industrial computers, process automation systems, industrial
keyboards, vision inspection systems, and military computers.
The DOM can easily be sealed into a system to create an interface impervious to
water and dust. Once properly sealed into a system, the DOM is designed to meet
NEMA 4X, 6P, 12 and 13 standards.
The DOM requires less than 1.250” (includes UL gap requirements) of mounting
depth (less than comparable trackballs or joysticks) allowing it to be integrated into
tight, cramped spaces. The module's slim mounting profile frees valuable space for
other system components or enables system size reduction. The module is unaffected
by mounting orientation: it can be mounted horizontally, as in a desktop industrial
keyboard; vertically, as in a process control panel; or any angle in-between. This
gives system designers maximum flexibility with product design and ergonomics.
® The DOM incorporates Interlink Electronics' VersaPoint Pressure-Pointing
technology. Directional control is achieved by applying finger pressure in the
direction of desired movement to the mouse button. Speed is controlled by altering
the amount of applied pressure. The result is smooth cursor movement in any
direction, from a precise crawl to a screen-crossing zip. VersaPoint technology
has no moving parts to break or wear out, thus delivering reliable, trouble-free
cursor control.
DuraPoint, with no moving parts to break or wear out, is completely maintenance-
free. Designed and manufactured with ruggedness and reliability in mind,
DuraPoint delivers “mouse” lifetimes in excess of 10 million actuations.
Before using or installing the DOM, please take a few minutes to carefully
review this integration guide.
The DOM has two flexible circuits that electrically connect to the
PCB. One connects to the shielding layer and the other connects
to the pressure sensor. Care should be taken during handling and
installation of the DOM to protect these tails against kinking or
tearing, which could permanently damage the module. The DOM's
PCB is ESD (electro static discharge) sensitive. Please use proper
static safeguards when handling the module.
1.0 Introduction to the DuraPoint OEM Module
DuraPoint Integration Guide Page 1