Ivoclar Vivadent Monobond-S - Manual

562132/1209/6spr/G
Monobond-S
Instructions for Use
Mode d’emploi
Instrucciones de uso
Instruções de Uso
Kullanma Kılavuzu
àÌÒÚÛ͈Ëfl
– Single-component primer agent between glass ceramics and resin
– Adhésif monocomposant pour les surfaces en vitrocéramique et
en résine
– Adhesivo monofrasco entre cerámica y resina
– Primer adesivo monocomponente para cerâmica vítrea e
compósito
– Cam seramikler ile rezin arasında tutunum için tek bileflenli
primer
– é‰ÌÓÍÓÏÔÓÌÂÌÚÌ˚È Ô‡ÈÏÂ ‰Îfl ÒÓÁ‰‡ÌËfl Ò‚flÁË ÏÂʉÛ
ÒÚÂÍÎÓÍÂ‡ÏËÍÓÈ Ë ÍÓÏÔÓÁËÚÓÏ
Instructions for Use
Description
Monobond-S is a single-component primer promoting an
adhesive bond between luting composites (particularly the
Variolink N and Multilink N product lines) and indirect
restorations made of glass-ceramics, lithium disilicate
glass-ceramics, composites and fibre-reinforced compos-
ites).
Composition
Alcohol solution of silane methacrylate.
Indication
Monobond Plus serves as bonding agent and is used to
create a durable chemical bond between luting composites
and glass-ceramic, lithium disilicate glass-ceramic, compos-
ite and fibre-reinforced composite restorations.
Contraindications
– Any use not listed in the indications.
– If a patient is known to be allergic to any of the
ingredients of Monobond-S.
Side effects
To date, no systemic side effects are known.
In rare cases, components of Monobond-S may lead to sen-
sitization. Monobond-S should not be used in such cases.
Interactions
Contamination with saliva, blood or water must absolutely
be avoided during the entire procedure.
Application
1
Adhesive cementation of prosthetic restorations:
1.1 Preparing the restoration
1.1.1 Glass-ceramic restorations (e.g. IPS Empress ® )
– Etch with 5% hydrofluoric acid (e.g. IPS ® Ceramic
Etching Gel) for 60 seconds or according to the
English
For dental use only.
Caution: U.S. Federal law restricts this device to sale
by or on the order of a licensed dentist.
Made in Liechtenstein
Ivoclar Vivadent AG, FL-9494 Schaan/Liechtenstein