JayBird BBX1 - Manual

L M S CORD CLIPS
(FOR LATER)
MAKE AN “S” SHAPE WITH THE MIDDLE SECTION OF THE CORD
USER GUIDE
BLUEBUDS X PREMIUM BLUETOOTH EARBUDS (BBX1)
03 GREAT SOUND PERFORMANCE IS IN
SELECTING THE RIGHT SIZE EARTIP
WE LOVE GREAT SOUND. MAKE SURE YOU HEAR IT.
Because everyone’s ears are different, be sure to try
all sizes of eartips. Only with the right size eartips
will you enjoy a snug fit & premium sound quality.
BACK IT UP WITH SECURE FIT EAR CUSHIONS.
The earbuds may slip out of your ear a little. You will
lose bass when this happens so use the secure fit
ear cushions to hold them in place for best sound.
CONTR
OLLER
ON
RIGHT
EAR
UNDER
-EAR:
SLIDE SECURE FIT EAR CUSHIONS ALL THE WAY BACK AND COVER LED
(DON’T WORRY, LED GLOWS CLEARLY THROUGH THE EAR CUSHION)
LOCK THE TIP OF THE EAR
CUSHION INTO THE TOP OF THE
BOWL OF THE EAR AS SHOWN.
YOU SHOULD HAVE A SNUG FIT
WITH CONTACT ON THE LOWER,
BACK AND TOP PORTIONS OF
THE BOWL OF THE EAR.
INSTALL YOUR PREFERRED SIZED SECURE FIT EAR
CUSHIONS AS SHOWN.
FITTING / SIZE SELECTION
GUIDANCE ON NEXT TWO PAGES.
01
04 SOUND CHECK
WHEN WORN UNDER-EAR:
CONTROLLER ON RIGHT side
NOTE EARTIPS ANGLE INWARDS (FORWARDS)
FOLLOWING DIRECTION OF YOUR EAR CANAL.
This means that L&R orientation is
reversed for over-ear, as explained later.
R
02 L&R ORIENTATION
Pair (set up) headphones to your
music device, play music,
and try
each size of eartip to find the
best fit and sound performance.
A proper seal is essential for you
to fully appreciate the high quality
audio of BlueBuds X.
NEED HELP PAIRING?
Full pairing details pages 29-32.
HOLD
4 SEC
TO
PAIR
ALTERNATING RED/GREEN
VOICE PROMPT:
“SEARCHING ...”
05 SECURE FIT
06 ENJOY
UNDER
01 NOW THAT YOU KNOW YOUR
PREFERRED EAR TIP & CUSHION...
and have a sense of the audio performance without
other distractions, you are ready for over-ear fitting.
REMOVE THE SECURE FIT EAR CUSHIONS.
YOU WILL INSTALL THEM DIFFERENTLY THIS TIME.
ADVANCED
OVER-EAR FIT OPTION
FURTHER TO THE MENTION ON THE BOX...
OVER-EAR FIT IS DEDICATED TO MUSIC, NOT DESIGNED FOR CALLS.
IT LIBERATES SPORTS MUSIC LISTENING BY LIFTING THE CORD OFF THE NECK,
AND SHIFTS THE MIC BEHIND THE EAR.
SOME ADJUSTMENT TIME IS NEEDED WHEN SWITCHING BETWEEN FIT OPTIONS.
L
WHEN WORN OVER-EAR:
CONTROLLER ON LEFT side
NOTE EARTIPS ANGLE INWARDS (FORWARDS) & UPWARDS,
FOLLOWING THE DIRECTION OF YOUR EAR CANAL.
R
02 L&R ORIENTATION
L
03 SECURE FIT
R L
TAKE YOUR PREFERRED SIZED
SECURE FIT EAR CUSHION AND
INSTALL IN REVERSE DIRECTION
WITH POINTED END NEXT TO CORD.
IMPORTANT: Check your size preference in under-ear
mode first as it can be difficult to tell in over-ear mode,
and may be different to other JayBird products.
04 CORD MANAGEMENT CLIPS
INSERT CORD INTO 2 OF THE 3 SLOTS IN EACH CLIP AS SHOWN OMITTING THE FINAL
ROUNDED SLOTS.
- PUT THE HEADPHONES ON, USING INDEX FINGER TO PUSH TIP OF EAR CUSHION
INTO PLACE TO SECURE EARBUDS (A MIRROR HELPS FIRST TIME).
- WITH EARBUDS SECURED, ADJUST POSITION OF CORD MANAGERS (PULLING
TOO TIGHT WILL OF COURSE DISLODGE EARBUDS, KEEP A LITTLE SLACK).
CONTR
OLLER ON LEFT
EAR
TAKE OFF HEADPHONES, INSERT CORD INTO THE FINAL ROUNDED SLOTS, PUT
HEADPHONES BACK ON, NOW YOU ARE READY TO GO!
Over-ear mode requires less cord, so before fitting, install the cord management clips to secure the slack for a customized fit.
See next steps.
05 ENJOY
IN THE BOX
BlueBuds X Bluetooth Headphones
JayBird Carry Case
3 pairs eartips (S,M,L)
3 pairs ear cushions (S,M,L)
2 cord management clips
USB Cable
User Manual
CHARGING
Charging the battery before use is recommended
but not required. BlueBuds X ships pre-charged
however initial charge will vary.
Look for this Bluetooth headset battery status
icon top right corner of your iPhone screen to
see status of BlueBuds X battery.
PAIRING (SETTING UP) HEADPHONES WITH YOUR PHONE / MUSIC DEVICE
1. With headphones turned off, & within 1 meter (3 feet) of music device, press & hold
center key for more than 4 seconds until you see alternating red/green flashing
of the status indicator and a voice prompt saying “Searching for your music device”.
2. On your phone/music device, turn Bluetooth on & have it search for Bluetooth devices
(see instructions in the phone/music device manual for details).
3. Check for “BlueBuds X” and select (enter passcode 0000 if prompted).
4. BlueBuds X voice prompt will say “headphones connected”.
5. If the pairing is not successful, switch off headphones by pushing the center key for
more than 4 seconds and repeat the steps outlined above.
PAIRING WITH A BLUETOOTH ADAPTER
1. Place headphones and mobile phone within 1 meter (3 feet) of each other.
2. Put the headphones into pair mode as outlined on prior page.
3. If using BAU Universal Bluetooth Adapter put into pair mode also (see BAU manual).
4. Plug the Bluetooth adapter into the music device and play a song.
5. The headphones and adapter will pair automatically
(passcode of adapter must be 0000).
6. After successful pairing and connecting, the headphones will say
“Headphones connected”.
PAIRING WITH SEVERAL BLUETOOTH DEVICES
Paired devices will remember each other unless pairing information is deleted,
so there is no need to pair again. BlueBuds X can pair and remember 8 phone/music
devices. Repeat the steps outlined on prior pages to set-up your headphones with
another phone/music device. Note that if a 9th phone/music devices is paired the
oldest pairing information is deleted. BlueBuds X will connect with the latest connected
device. If you want to use another paired phone/music device, switch off the Bluetooth
function of the current Bluetooth device, and then connect it with the other
phone/music device by selecting “BlueBuds X” in the Bluetooth device list and
press connect. Turn the originally paired device back on to reconnect and switch
between either of the devices.
Bluetooth Version V2.1 + EDR (newer versions offer no benefits for headphones)
SBC codec
Customised SBC codec offers high fidelity without needing APT-X
Profile Handsfree v1.6, Headset v1.1, A2DP v1.2 and AVRCP v1.4
Effective Range 10 meters (30 feet)
Working time
Music & calls up to 8 hours
Standy time Up to 250 hours
Input voltage DC 5V 100mA
Charging time Approximately 2 hours
Dimensions 23 x 13 mm earbud size, 540 mm cord length
Weight Approx 13 g
WARRANTY, CARE & MAINTANCE
Full warranty, care and maintenance details at jaybirdgear.com/warranty
+1.866.244.3399
WARNING: Due to the isolating characteristics of these headphones do not use while driving, riding a bike or where vehicular traffic
is present, or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these headphones at
excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution in regards to
inserting objects into ear canal, use at own risk.
Copyright 2012 JayBird, LLC. All rights reserved. JayBird, and the JayBird logo are trademarks of JayBird, LLC.
Bluetooth is a trademark owned by Bluetooth SIG, Inc. USA, and licensed to JayBird, LLC. iPhone is a trademark of Apple, Inc., registered
in the U.S. and other countries. Manufactured under European patent no EP1410607B1 & corresponding foreign patents. Assembled in China.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications to device will void the user’s authority to operate the device. The battery is recycled.
Do not dispose of the battery in fire, as it may cause explosion.
SPECIFICATIONS
LED STATUS
Red: Charging
Green (with USB cable connected): Charged
Red+Green Alternating: Pair Mode
No Light: Standby / Play Mode / Powered Off
VOICE PROMPT
“BATTERY LOW”
Approx 15 mins
prior to empty
MICRO USB CHARGING
Locate fingernail recess
and remove back cover to
expose micro USB charge
point. 2+ hrs for full charge
gives 8 hours of playtime.
30 mins charging gives
90 minutes of play time. ARE HEADPHONES ON? IS BATTERY LOW?
In Standby * mode, push + or -, watch LED:
Green = Powered on and well charged
Red = Low battery
No Light = Powered off
* Standby Mode:
Powered on but not connected to any device
PAIR MODE: LED ALTERNATES RED/GREEN
DETAILED INSTRUCTIONS
BEGIN WITH THE TRADITIONAL
UNDER-EAR FIT OPTION
TO DETERMINE YOUR SIZES
LISTEN RESPONSIBLY
Avoid excessive volume levels
and prolonged periods of listening.
Do not use around road traffic.
HAVE FUN
Your ear canal travels up and forward.
The intelligent patent pending BlueBuds
X angles to the same direction in either
wearing style, encouraging a great,
snug fit.
04
06
08
10
14
16
18
20
22
24
28
30
32
34
27
29
31
33
HOLD
4 SEC
TO
PAIR
VOICE PROMPT:
When you hear “Power on” continue pushing until you hear
“SEARCHING FOR YOUR MUSIC DEVICE ...”
UNDER
UNDER
UNDER
OVER
OVER
OVER
OVER
OVER
OVER
TAKE A MOMENT TO REGISTER YOUR
LIFETIME WARRANTY AGAINST SWEAT
jaybirdgear.com/intheclubnow
COMMANDS
Add’l Center Button Call Commands
PUSH 1 SEC PUSH 4 SEC PUSH
QUICK FIND
SETUP
UNDER-EAR SETUP AND SOUND CHECK
OVER-EAR SETUP
DETAILED INSTRUCTION
IN-THE-BOX
CHARGING & BATTERY STATUS
PAIRING
COMMANDS
SPECS & WARRANTY
02
..........................................................2
............................................................................................12
.....................................................................................................27
.......................................................................27
...........................................................................................................29
......................................................................................................33
........................................................................................34
12
INSIDE THE ACCESSORIES PACKET
R L
ON
OFF
ON
Answer 2nd call, end call
Reject 1st/2nd call, switch
between 2 calls, voice dial
Redial
Mute & unmute call: push + & -
Switch active call to BlueBuds X: push -
36 35