Jetway Computer NAF93-Q77 - Manual (Page 32)

28
Press [Enter] to view hardware health status.
► Second Super IO Configuration
► COM3/COM4/ COM5/COM6 Configuration
Serial Port
Use this item to enable or Disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
Serial Port Mode Select
Use this item to set serial port as [RS232] or [RS422/485].
*Note: Serial Port Mode Select function is only optional for COM4 port.
► Third Super IO Configuration
► COM7/COM8/COM9/COM10 Configuration
Serial Port
Use this item to enable or Disable serial port (COM1).
Change Settings
Use this item to select an optimal setting for super IO device.
► WatchDog Configuration
Press [Enter] to make settings for Watchdog Configuration:
Watchdog Configuration:
WatchDog Timer Control
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Val
User can set a value in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Second];[Minute].
► Chipset Voltage Configuration
Use this item to choose the Voltage Parameters. Press [Enter] user can make
settings for DRAM Voltage.
► Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
► CPU PPM Configuration
Press [Enter] to make settings for CPU PPM Configuration:
CPU PPM Configuration:
EIST
Use this item to enable or disable Intel SpeedStep.
CPU C3 Report
Use this item to enable or disable CPU C3 (ACPI C2) report to OS.
CPU C6 Report
Use this item to enable or disable CPU C6 (ACPI C3) report to OS.
► SmartFan Configuration
Press [Enter] to make settings for SmartFan Configuration:
CPUFAN / SYSFAN1/ SYSFAN2 Smart Mode
When set as [Enabled], the following sub-items shall appear: