Jetway Computer NC73 - Manual (Page 28)

23
Auto: enables LBA Mode if the devices support it and the device is not already
formatted with LBA Mode disabled.
Block (Multi-Sector Transfer): The optional settings are: Disabled and Auto.
Disabled: The Data transfer from and to the device occurs one sector at a time.
Auto: The Data transfer from and to the device occurs multiple sectors at a time if the
device supports it.
32 Bit Data Transfer: the optional settings are: Disabled and Enabled.
3-5 Advanced BIOS Features
► Hard Disk Drivers
Press [Enter] to go into sub-items and specify the boot sequence from available
devices.
Quick Power On Self Test
This item allows BIOS to skip certain tests while booting. This will decrease the time
needed to boot the system. The optional settings: Disabled; Enabled.
Boot Up NumLock Status
The default value is On.
On (default) Keypad is numeric keys.
Off
Keypad is arrow keys.