Kanguru MP3 v3 - Manual (Page 6)

6
3. Basic functions
3.1 turning the MP3 Player on/off
Please make sure the player is unlocked. The Hold key should be in the unlocked position 1. .
Power on: While player is off, press and hold the 2. button to power on the player.
Power off: While player is on, press and hold 3. button while the words “Power off” display
on screen. Continue to hold until the progress bar is full and “See You” appears.
note:
When powering on, the player may temporarily pause (the duration of the pause links to the •
player capacity). The player is initializing and is subject to this normal operation.
Power-on memory function: When the player powers on, it will start in the mode it was in at the •
time of the last power-off (music, FM, and E-book). If powering off under Pause status, it will
enter the position that was playing at the time of previous power-off.
If there is any failure during operation, the player can be reset by taking out the battery and then •
putting it back In.
3.2 Music playback
Press and hold the
M
button to enter the Main Menu. In main menu screen you can choose the Music
Mode by pressing the buttons, as the following figure shows:
Short press the
M
button to enter Music Mode. Short press to start playing the current song.
This displays such information as song number, type, and name, singer, lyrics, sound effect mode,
bit rate, repeat mode, A-B repeat mode, volume, charge display as well as the play duration current
song.
Basic Functions