Keekaroo Height Right High Chair + Infant Insert + Tray + Tray Cover - Manual (Page 7)

Seat and Foot Adjustment
Slide in the Seat and Foot Plate with the curved
edge facing forward. Make sure that the Seat
and Foot Rest are at the appropriate height for
the occupant. See the Seat and Foot Adjustment
section for proper placement of the Seat and
Foot Rest.
4
• Place child in seat. Crotch strap comes up between child’s legs.
Both Lap Straps come around child from the back and
“CLICK” into Crotch Strap. Adjust length of Lap straps to
secure child in seat.
• Press center button on Crotch Strap buckle to release child
from belt.
3 Point Belt Operation
Lap Strap “CLICK”
Crotch
Strap
5
TIGHTEN ALL SCREWS (BOTH SIDES) IN
ORDER 1-5 _DO NOT OVER TIGHTEN!
• IF TOP METAL CROSS BAR
IS NOT NECESSARY-
END WITH # 4
Top Metal
Cross Bar
Bottom
Metal
Cross Bar
Front
Support
Back Rest
Back Leg
Supports
5
4
3
2
1
Height Right Kids Chair
Natural
Model #
0050002KR-0002
Height Right Kids Chair
Mahogany
Model #
0050003KR-0001
Product Care
Clean chair with damp cloth; then wipe
dry. With normal use, over time screws
may loosen. Please maintain tight screws.
Use chair on smooth level surface.
Notice
Use only Height Right Kids Chair accessories and parts. Height Right Kids Chair parts are not interchangeable with other manufacturers’ products.
Replace any worn parts immediately for safety. © 2012 Bergeron By Design.
Customer Service
Toll Free:
1-800-994-2416
International: 1.315.429.8407
Fax: 1.315.429.8862
5 Year Limited Warranty
Bergeron by Design warrants to the original retail purchaser of the Height Right
Kids Chair product, that if any part or component proves defective in material or
workmanship within five years of the purchase date, the defective part will be
repaired or replaced (at Bergeron by Design’s discretion) free of charge. Warranty
service may be performed by an authorized service center or at Bergeron by
Design’s discretion.
This warranty does not cover normal wear and tear, or damage caused by accident
or misuse.
To exercise this limited warranty, the user should first obtain a Return Authorization
Number from Bergeron By Design. The product must be delivered charges pre-paid
(UPS recommended) to the factory or to an authorized service center, together with
a copy of the original invoice, the Return Authorization Number and a written
description of the problem.
6
Attach Black Caps with 2 small Screws
(b). as shown above. Repeat for Left.
Height
The seat is placed at optimal height when
the child’s elbows are level with the top
of the table.
The foot plate is placed at optimal height
when the child’s foot can rest flat
on it’s surface.
Depth
For optimal depth of the seat, position
child’s back against backrest with seat
supporting 3/4 of thigh.
For safety, the footrest should not exceed
the front legs of the chair.
Teen / Adult Use
Remove Seat Plate & Top metal cross bar.
Use the Foot Rest as the Seat Plate for a
larger seating surface.
Caps
TIGHTEN ALL SCREWS
.
HARDWARE
b (4pcs.)
* As the child grows,
the TOP metal cross
bar CAN be removed.
Bergeron By Design • 15 South Second St. Dolgeville, NY 13329 • 1.866.529.8407
3