Denon AVR-789 - Manual (Page 46)

Specifications
Surround Parameter
Adjust surround sound parameters.
The parameters (items) which can be adjusted differ
depending upon the following conditions.
• Whether an input signal is present (when playing) or not
(when stopped, etc.).
• The type of input signal
• The type of surround mode
For details of which parameters can be adjusted in each
surround mode, see “Surround Modes and Parameters”
(vpage 72, 73).
n Surround Parameter
a Mode
s Cinema EQ
d Dynamic Range Control
f Dynamic Range Compression
g LFE
h Center Image
j Panorama
k Dimension
l Center Width
A0 Delay Time
A1 Effect Level
A2 Room Size
A3 AFDM (Auto Flag Detect Mode)
A4 SB CH Out
A5 SUBWOOFER ATT
A6 Subwoofer
n Tone
A7 Tone Control
A8 Bass
A9 Treble
n Audyssey Settings
S0 MultEQ
S1 Dynamic EQ
S2 Dynamic Volume
S3 Setting (Dynamic Volume Setting)
n RESTORER
n Night Mode
n Audio Delay
F Menu screen F
2.Tone
3.Audyssey Settings
4.RESTORER
5.Night Mode
6.Audio Delay
1.Surround Parameter
4.Parameter
Surround Parameter
Adjust surround sound parameters.
The adjustable parameters differ for the different surround modes
(vpage 72, 73).
d Dynamic Range Control
Compress dynamic range (difference between loud and soft sounds).
[Selectable items] Auto Low Mid High OFF
This can be set in the Dolby TrueHD mode.
s Cinema EQ
Soften the treble range of movie soundtracks for better understanding.
[Selectable items]
ON
: “Cinema EQ” is used.
OFF
: “Cinema EQ” is not used.
The “Music” mode is also effective for movie sources including a lot
of stereo music.
a Mode
Select the mode to match the source (cinema source, music source,
etc.).
n In the PLgx or PLg mode
[Selectable items]
Cinema
: This is the mode for cinema source.
Music : This is the mode for music source.
Game
: This is the mode for game source.
PL : Dolby Pro Logic playback mode (PLg mode only).
(This is the mode for 4-channel playback (front L, front R,
center, surround (MONO).)
n In the DTS NEO:6 mode
[Selectable items]
Cinema : This is the mode for cinema source.
Music : This is the mode for music source.
Operating from the remote control unit
“Cinema” mode and “Music” mode crossover operation is executed
with the remote control unit.
Press
[CINEMA] or [MUSIC] .
g LFE
Adjust the low-frequency effects level (LFE).
[Variable range] –10dB ~ 0dB
For proper playback of the different program sources, we recommend
setting to the values below.
• Dolby Digital sources: “0 dB”
• DTS movie sources: “0 dB”
• DTS music sources: “–10 dB”
f Dynamic Range Compression
Compress dynamic range (difference between loud and soft sounds).
[Selectable items]
OFF
: Turn dynamic range compression off.
Low
: Low setting.
Mid
: Middle setting.
High
: High setting.
When playing DTS sources, this is only displayed for compatible
software.

Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
ENGLISH
For details on adjusting individual parameters, see “Adjusting the parameters” (vpage 42).