Kleenmaid CM03X - Manual (Page 13)

1 3 I C T- 0 9
COFFEE TEMPERATURE
Press the key and the display panel shows:
Using the keys you can change and set the temperature of
the coffee. The scale of variation ranges from 14° to +50° F (from -10 °C
to +10 °C). The 0 position corresponds to the optimal factory setting.
HOT WATER TEMPERATURE
Press the key and the display panel shows:
Using the keys you can change and set the temperature
of the hot water. The scale of variation ranges from 14° to +50° F (from
-10 °C to +10 °C). The 0 position corresponds to the optimal factory
setting.
STEAM TEMPERATURE
Press the key and the display panel shows:
Using the keys you can change and set the temperature
of the steam. The scale of variation ranges 14° to +50° F (from -10
°C to +10 °C). The 0 position corresponds to the optimal factory
setting.
Press the key to exit the programming function.
SETTING THE GRIND
A number of factors help you to understand whether the grinding
level needs to be adjusted:
• If the coffee is dispensed too quickly, this means that the beans
have been ground too coarsely.
• If the coffee comes out in slow drips, this means that the beans
have been ground too finely. A very important factor for ensuring
a good coffee is the right setting for the grinding level, which is
factory-set but can also be modified as follows:
• Open the machine.
• Carefully turn the dial located on the left side of the machine “A”
(Fig.5).
Turning the dial clockwise produces a finer grind; turning it anti-
clockwise produces a coarser grind.
Note: Turn the dial min. 3 complete turns, clockwise or anti-clockwise,
to obtain a change in the degree of grinding, finer or coarser.
IMPORTANT !! After setting the new grind, it is necessary to
dispense at least 2 coffees.
SELECTING THE TYPE OF ESPRESSO
TEMPERATURE
COFFEE +00
Using the key you can select from among the following
types of espresso dose:
SHORT
MEDIUM
LONG
ADJUSTING THE ESPRESSO DOSE
To change and memorize the quantity of coffee, proceed as follows:
• During the infusion, press and hold the key
until the desired
quantity (coffee dose) is reached.
The display shows the message “MEMO ?”
If you want to memorize the dosage of coffee just made, proceed
as follows:
• To memorize, as soon as the infusion is finished, use the key
to select the type of coffee (short, medium, or long) on
which to memorise the new setting.
• Press and hold the key again until you hear the beep
of confirmation.
Now the new quantity of coffee is memorized and associated with
the type of coffee selected.
SETTING 1 OR 2 COFFEES
With this machine you can prepare a single coffee or 2 coffees
simultaneously.
Make your selection using the key
COFFEE 1 SHORT
WATER MEMO ?
Fig. 5
CM03X_U&C_ICT-0…- KLEENMAID.pdf 16/6/08 11:08:06 AM
TEMPERATURE
WATER +00
TEMPERATURE
STEAM +00
CM03X_U&C_JULY08.pdf 26/6/08 9:09:35 AM
CM03X_U&C_JULY08.pdf 9/7/08 10:59:30 AM