Kleenmaid CH600CM - Manual (Page 7)

All electrical wiring must be in compliance
with the appropriate I.E.E. and local Electrical
Board regulations and carried out by a quali-
fied electrician.
The hob must be supplied via a suitable
double pole isolating switch, placed in a rea-
dily accessible position adjacent to the hob.
WARNING: THIS APPLIANCE MUST
BE EARTHED
The hob is fitted with a data plate attached
to the base, indicating the rated input and
voltage at which the hob must operate.
BEFORE CONNECTING AND INSTALLING
THIS HOB THE ELECTRICITY MUST BE
TURNED OFF AT THE MAINS. The electrical
connection to the hob must be connected to
the terminal block (Fig.8) with a cable of the
correct rating (see data plate) by a qualified
electrician . Access to the mains terminal
connection block is by removing the small
cover situated on the bas of the hob.
THE CONNECTIONS ARE AS FOLLOWS:
Live connection - Terminal marked L
Neutral connection - Terminal marked N
Earth connection - Terminal marked
with the earth sym-
bol
This appliance complies with the radio inter-
ference requirements of EEC Directive
76/889/EEC.
7
L N
Fig. 8
ELECTRICAL CONNECTION ELECTRICAL CONNECTION
Hob technical data
Operating voltage.....................................................................230 V
∼∼
50 Hz 32 Amps
Total power consumption........................................................6500 W
Dimensions of cut-out.................................................................Width 560 mm
....................................................................................................Depth 490 mm
Max. space required under worktop .....................................................................64 mm
Overall dimensions under worktop.............................................Width 555 mm
....................................................................................................Depth 485 mm
Overall dimensions above worktop ............................................Width 580 mm
....................................................................................................Depth 510 mm
Weight about 11 kg
Manufacturer N°419