Kleenmaid FEG605X - Manual (Page 30)

30
SEMI-AUTOMATIC COOKING
This automatically switches the oven off after the required cooking time. There are two
methods of semi-automatic cooking:
1° METHOD: Programming the cooking time (Fig. 25)
– Set the cooking time by pressing button and then button to move forward or
to move back if you have gone beyond the required time.
The word AUTO and the symbol will appear.
2° METHOD: Programming the end of cooking time (Fig. 26)
– Set the end of cooking time by pressing button and then button to move for-
ward or to move back if you have gone beyond the required time.
The word AUTO and the symbol will appear.
Having programmed according to one of the above methods, set the temperature
and function via the function selector and thermostat knob (see specific chapters).
The oven will come on immediately and when the set time or programmed end of
cooking time expires, it will automatically switch off.
During cooking the symbol
remains on; press button to display the remaining
time until end of cooking.
The cooking program can be cancelled at any time by pressing the two buttons
.
At the end of cooking, the oven will switch off and the symbol
will go out, the
word AUTO will flash and an acoustic signal will come on - this can be switched off by
pressing any of the buttons.
Reset the function selector and thermostat knob and set the programmer to manual by
pressing the two buttons
.
A
Figure 25 Figure 26