Kleenmaid TO900X - Manual (Page 7)

6
Oven Operation
Using Your Oven
It is very important to learn how to properly
use your oven to obtain the best cooking
results.
Following you will find important information
for the safe and efficient use of your oven.
Before using for the First Time
Before using your Kleenmaid oven for the first
time remove all packing and foreign materials
from the oven(s). Any material of this sort left
in the oven(s) may melt and/or burn when the
oven(s) are used.
When you first use your oven, the oven will
need to ‘settle’. That is, it needs to burn off
production residues and dust. The metal used
will also expand slightly when first used. You
may experience some crackling sounds, a
strong smell and an emission of smoke. This
is perfectly normal.
We advise you to anticipate this 'settling’ prior
to use. Using an empty oven select
Convection Roast and set at a temperature of
250°, allow the oven to ‘settle’ for ½ hour, turn
to Convection Bake and heat for a further ½
hour.
During this procedure ensure the room is
well ventilated.
Oven Control Panel
All the ovens have the following controls, as
shown in Figure 3 (Page 7) and Figure 4
(Page 9).
• Programmer push-buttons:
- Interval Time Button
- Duration
Button
- Operation End Button
- Roast Probe Programmer
- Programming + / - Dial
• Programmer display
• On/Off light
• Heat light
• Door lock light
• Timer/Manual selector knob
• Temperature control knob(s)
• Mode selector knob(s)
The double oven control panel is the upper
panel shown in Figure 3 and the single oven
control panel is the lower panel shown.
Programmer Push-Buttons
The programmer push buttons are used to set
and program the oven. See sections
Electronic Timer and Programming the
Oven for explanation on how to use the
programmer push buttons.
Programmer Display
The programmer display performs many
functions.
When the electricity to your oven is first turned
on, the display will be blank. For information
on setting the display and its use as a timer or
for programmed cooking see sections
Electronic Timer and Programming the
Oven, following.
Timer/Manual Selector
The Timer/Manual selector knob is used to set
the oven(s) for Manual or Timer mode.
On Light
The on light will be illuminated whenever the
oven is on.