Kleenmaid VC700 - Manual (Page 7)

6
3. Assembly
Your Kleenmaid vacuum can be operated with an electric power brush (15) or parquet brush
(18). To assemble, carefully attach the brush nozzle to the vacuum cleaner through the
fitting at the bottom of the vacuum, until it locks.
The machine can be placed in an upright position when used with the electric power brush.
When locking the vacuum in the upright position, please ensure the bag housing is clicked in
place, facing forward to the centre or the unit could overturn.
Push the black end of the hose (8) into the connection on the filter cover (6). Finally, insert
the hose handle (9) into the suction opening on the side and press the hose into its place on
the side of the machine.
4. Operating Instructions
Please ensure that the on/off switch (2) is in the off position. Then turn the power cord hook
(7), release the cord (4) and plug it into the wall mains outlet. Before you start working
adjust the telescopic handle tube (3). Use the handle-catch (17) to adjust the height of the
telescopic handle tube (3). Now you can start the machine by moving the on/off switch to
the on position. Your machine is also equipped with electronic suction control.
To use the power head, press the foot pedal (16) on the rear of the power head and lower
the machine handle to an angled position. The brush motor will then turn on.
16
13
14
15
6
8
9
3
17
4
7
2
+