Kleenmaid DW9 - Manual (Page 12)

• 13 •
Voltage : 240 V – 50 Hz – Fuses : 10 A
Power : 2300 W
Capacity : 14 place settings
Water pressure : 3 psi/21 kPa min
100 psi/690 kPa max
Water evacuation pipe height : 60 cm - 1 m
TECHNICAL CHARACTERISTICS
INSTALLING THE PANEL DOOR
COMPARATIVE TESTS ACCORDING TO : AS/NZS 2007 : 98 (Fig. 8-10-12)
With the “Condensor Drying” activated
Programme “Fragile wash 40°C”
+
• Rinse aid dispenser setting on : 3
• Quantity of washing product : 10+40 g.
• For the determination of Drying Index the door of the dishwasher was opened approximately
240mm at the end of the program for 30 minutes.
If you use the door and false drawer, mount the
door using the plans supplied with the machine.
Fix the false drawer equipped with an opening
handle, previously installed on the band using
the six screws supplied in the plastic bag (Fig. A).
The false drawer may be mounted level with the
control band (Fig. B) or slightly raised (Fig. C)
but should not overlap by more than 3 mm
maximum.
The handle on the false drawer’s fixing screw
heads must be flush with the false drawer.
If using a one-piece panel, assemble using the
plan.
Do not forget to add the 6 fixing screws
supplied in the plastic bag to the band.
Be careful to respect the 3 mm minimum
overlap between the top of the door and the
decorative panel (Fig. C).
3 mm
Max
Fig. B Fig. C
Dishwasher
door
Door panel
False drawer
635 à 715
(panel 715 mm maximum)
Fig. A
6 fixing screws supplied in the plastic bag