Kleenmaid KED501 - Manual (Page 19)

130716
Interferences from the ambient (for example
electrical wiring) could induce signalization of
different faults. In such cases:
- switch the appliance off, and wait for a few
seconds;
- switch the appliance back on and repeat the
drying program.
If the fault repeats, call authorized service shop.
Warranty shall not apply in case of failures due to
interferences from the environment (lightning stroke,
power supply circuit faults, natural disasters).
19
Troubles
Trouble Check
Appliance does not
work:
• If there is current in the socket and if the fuse is
functioning.
• If the plug is correctly inserted into the socket.
There is current
in the socket, but
the drum is not
rotating:
• If the door is closed tightly (press it towards the
appliance).
• If the program runs according to instructions.
• If appropriate drying time is selected.
Laundry is not dry: • If the filter is clean.
• If the room is adequately ventilated.
• If the amount of laundry to be dried is not too large.
• If the evacuation tube is too long (only with vented
dryer - max  m).
• If the laundry loaded in the drum has not been spun
enough or if appropriate drying time has been set.
Unevenly dried
laundry:
• If the amount of laundry to be dried is not too big.
• If there are only large pieces of laundry (large and
small pieces should be dried together).
• If different fabrics are dried together (group the
laundry according to the type of fabrics).
The machine signals errors or failures in operation by flashing signal LED's.
Record number of flashes representing the failure, shut the machine off and
call nearest authorised service centre on 1300 65 100.
If a failure occurs due to incorrect installation or inappropriate use of the
appliance, the warranty is void, and the repair bill shall be settled by the user.