Motorola GM 340 - Manual (Page 24)

22 English
U
T
IL
IT
IE
S
LONE WORKER
The Lone Worker feature enables you to work
alone with added safety.
You can switch On or Off Lone Worker by
using a pre-programmed Lone Worker button.
To enable Lone Worker
1. Press the Lone Worker button to switch
Lone Worker on, when the feature enable
alert will sound and the associated LED
will light.
• If you have not pressed any buttons within
a programmed time, you will be reminded
that Lone Worker is switched on by a high
pitched alert tone (Lone Worker Reminder)
being sounded.
• Press any button to respond and cancel
the alert, if you do not the radio will enter
the Emergency state.
To disable Lone Worker
1. Press the Lone Worker button again to
switch Lone Worker off, when the feature
disable alert will sound and the
associated LED will be extinguished.
2. You may also switch off Lone Worker by
changing the channel or switching radio
off and on again.