Motorola DP 2400 - Manual (Page 13)

Prep
aring Y
o
ur Radio for Use
English
5
Attaching the Accessory Connector
The accessory connector is
to be secured to the
universal connector on the
antenna side of he radio.
To attach the accessory
connector, refer to the steps
shown in the diagram.
To remove the accessory
connector, refer to the steps
shown in the diagram.
Powering Up the Radio
Rotate the On/Off/Volume
Control Knob clockwise until
you hear a click. The LED
lights up solid green.
A brief tone sounds,
indicating that the power up
test is successful.There is no
power up tone if the radio
tones/alerts function is
disabled (see Turning Radio
Tones/Alerts On or Off on
page 42).
If your radio does not power
up, check your battery. Make
sure that it is charged and properly attached. If your radio still
does not power up, contact your dealer.
To turn off the radio, rotate this knob counterclockwise until you
hear a click.
1
2
3
1
2
3
NDP_ANZ-EMEA.book Page 5 Thursday, July 19, 2012 8:22 AM