Sirio 2016 - Manual

DESCRIPTION
SPECIFICATIONS
Hi-quality base station antennas working on 27 MHz. They are made of anti-corodal aluminium tubes and
supplied with polythene jointing sleeves to guarantee a perfect waterproofing. Strong and easy to install,
they allow very good links.
Electrical Data
Type : 5/8 l Ground Plane
Frequency range : 26.4...28.2 MHz tunable (see table)
Impedance : 50 W
Radiation (H-plane) : 360° omnidirectional
Polarization : Linear Vertical
Gain : 1.3 dBd, 3.45 dBi
Bandwidth @ SWR
£
2
SIRIO 2008, SIRIO 2012 :
³
1750 KHz (160 channel)
SIRIO 2016 :
³
2100 KHz (200 channel)
SWR @ res. freq. : £ 1.1
Max Power : 1000 Watts (CW) continuous
: 3000 Watts (CW) short time
Feed system/ position : Transformer DC-ground / base
Connector : UHF-female
Mechanical Data
Materials : Aluminium, Copper, Nylon
Brass, Galvanized Steel
Wind Load / Resistance : 166 N @ 150Km/h / 130 Km/h
2 Wind surface : 0.14 m
Length (approx.) : 6100 mm
Weigth (approx.) : 5300 gr
Radial lenght
SIRIO 2008, SIRIO 2012 : 1320 mm
SIRIO 2016 : 700 mm
Mounting Mast : Æ 40-50 mm
DESCRIPTION
SPECIFICATIONS
SIRIO 2000 series
CB Base Station Antennas
SIRIO 2000 series
HI-QUALITY ANTENNAS MADE IN ITALY
ID042
TYPICAL S.W.R. RESPONSE
Model: SIRIO 2008/12 S.W.R.
1.0
1.2
1.8
1.4
2.2
1.6
2.0
2.4
2.6
2.8
3.0
25.75 27 28.25
f.(MHz)
File: F-01-002
TYPICAL S.W.R. RESPONSE
Model: SIRIO 2016 S.W.R.
1.0
1.2
1.8
1.4
2.2
1.6
2.0
2.4
2.6
2.8
3.0
25.75 27 28.25
f.(MHz)
File: F-01-003
SIRIO 2000 series features:
SIRIO 2008 : with 8 G.P. radials lenght=1320mm
SIRIO 2012 : with 12 G.P. radials lenght=1320mm
SIRIO 2016 : with 16 G.P. radials lenght= 700 mm
HIGH POWER IMPEDANCE
TRANSFORMER
Construction details:
·
Coil cover made of
trasparent anti-shock
material.
·
Low loss coil support
with finger spacers.
·
Ø 75mm coil made of
Ø 4.5mm copper wire.
·
UHF-female connector
with protection cap.
·
Discharge holes for
possible condensations.