Vertex Standard eVerge EVX-531 - Manual (Page 18)

EVX-530 S
EriES
O
pErating
M
anual
16
EVX-539
A
B
C
D
1
4
PQ
RS WX YZ
GHI
ABC
JKL
TUV
DEF
MNO
DEL
5 6
7 8 9
0 #
2 3
?
CXL
OK
A
B
C WX YZ
DEF
MNO
CXL
o
pEratIon
 P r e s s t h e ( O r a n g e )
TOP SEL key, SIDE-
2 b u t t o n , o r E V X -
534/-539 front panel’s
programmable keypad
to activate one of the
pre-programmed func-
tions which may have
been enabled at the
time of programming
by the dealer. See the
next chapter for details
regarding feature avail-
ability for this radio.
 If a Speaker/Microphone
is available, remove the
plastic cap and its two
mounting screws from
the right side of the
transceiver, then align
the connector of the
Speaker/Microphone
on the radio; secure the connector pin using the
screws supplied with the Speaker/Microphone.
Hold the speaker grille up next to your ear while
receiving. To transmit, press the PTT switch on
the Speaker/Microphone, just as you would on
the main transceiver’s body, and speak into the
microphone on a normal voice level.
Note 1): Save the original plastic cap and its
mounting screws. They should be reinstalled
when not using the Speaker/Microphone.
2) When you press the PTT switch on the Speak-
er/Microphone, it disables the internal micro-
phone, and vice versa.
EVX-534
A B C D