DigiTech CM-2 - Manual (Page 8)


Voicing Switch - This switches between the Overdrive’s two voic-
ings. Classic voicing provides the kind of gain you need for amaz-
ingly crunchy rhythms. Modified voicing pushes your amp to the
limits with just the extra gain you need for hot solos.
Input - Connect your instrument or the output of another pedal
to this jack. This jack enables battery power to the pedal when con-
nected. To prolong battery life, disconnect the cable from the Input
jack when not in use. If the optional Harman PS200R power supply
is used, cables can remain connected.
Foot Switch Release Pins - These two pins are spring loaded
hinges that hold the Foot Switch in place. See page 7 for informa-
tion on accessing and changing the battery.
Indicator LED - Lights when the effect is turned on. When bat-
tery power is low (approximately 5 minutes before it dies), the
Indicator LED begins to dim giving you advanced warning that very
shortly you will need to replace the battery. 6.
7.
8.
9.