Kiddy Cruiserfix Pro - Manual (Page 11)

10
Do not install this booster car seat in a vehicle seating position using the
k-fix connectors if:
The seat belt is located between the lower LATCH anchors.
The seat belt buckle is located between the lower LATCH anchors.
An appropriate vehicle three point seat belt will
have:
1. The shoulder belt upper retractor rigidly
fixed to the vehicle frame or vehicle
seat (Fig. 10) and
2. The lap belt rigidly fixed to the vehicle
frame or vehicle seat (Fig. 10).
Once you have chosen the seating position in the vehicle, place the
booster car seat on the vehicle seat, centered in the position so that the
booster car seat seat back fully contacts the vehicle seat back.
The backrest of this booster car seat is adjustable. It must be adjusted to fit
securely against the backrest of the vehicle seat.
•If the vehicle headrest holds the booster car
seat forward of the vehicle seat back, the
headrest should be adjusted or removed
(Fig. 11).
•If the vehicle seat back angle is adjustable,
adjust it to the upright position to match the
angle of the booster car seat.
ENG
Fig. 10
Fig. 11