Kiddy adventure pack - Manual (Page 9)

ENG
6
3.3 Adjusting the sunshades
In order to use the sunshade, open the zipper on the headrest of the child
carrier.
Pull out the sunshade (Fig. 3, No. 1) and clip the two sunshade hooks into
the respective loops of the child carrier (Fig. 3, No. 2).
3.4 Adjusting the belt height of the child seat belt system
The shoulder straps of the 5-point harness can be adjusted to 3 heights in
order to fit your child (Fig. 4, A, B & C).
The strap height is correct when the shoulder straps are slightly above the
shoulders of your child.
To use the shoulder straps at a different height, thread both straps out from
the adjusters, insert into both loops at the appropriate height and feed the
straps back into the adjuster (Fig. 4).
After the adjustment, both shoulder straps must be inserted at the
same height and it must be ensured that the straps are held tightly by
the adjusters.
3.5 Adjusting the seat height of the child seat
The seat height can be adjusted to in order to fit your child (Fig. 5).
The seat height can be adjusted with the adjustment strap, tightening will lift
up the seat (Fig. 5; A) and loosening will lower the seat (Fig. 5; B).
The child’s chin should be about level with the top of the chin pad.
The seat height also affects the 5-point harness. If this is adjusted,
the correct position of the shoulder straps must be checked and
readjusted if necessary.