Kussmaul Electronics 091-73-30-120 - Manual (Page 3)

NOTES AND CAUTIONS
NOTE
Do not permit the shore line to drop to the floor when it is ejected. Keep from falling
by utilizing a bungee cord restraint, cord reel or some other device. Dropping the
connector may result in damage or breakage. Kussmaul Electronics does not warrant
the IEC 309 connector.
ABOUT CONNECTORS
The Super 30 Auto Eject utilizes an IEC 309 mating connector. We suggest that you
utilize the connector supplied. When replacing with another connector, test carefully
that the new connector will eject properly.
CAUTION
THE EXTEND PUSHBUTTON SWITCH MUST BE
PUSHED ONLY MOMENTARILY TO EXTEND THE AUTO
EJECT TO THE FIRST POSITION TO RECEIVE THE
SHORE LINE. IF THE PUSH-BUTTON IS HELD DOWN,
THE AUTO EJECT WILL EXTEND FULLY AND DEFEAT
THE INTERRUPTER SWITCH.
IMPORTANT
YOU MUST INSTALL A FUSE BETWEEN THE BAT-
TERY + TERMINAL ON THE SUPER 30 AUTO EJECT
AND THE BATTERY. FAILURE TO DO THIS WILL VOID
THE WARRANTY.