Calendar setting – La Crosse Technology WS-9724 User Manual
Page 20
Advertising
MANUAL TIME SETTING
In case the Weather station is not able to detect the radio-controlled time (DCF time) signal
(disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work
as a normal Quartz clock.
Hours (flashing)
Minutes (flashing)
To set the clock:
1.
The hour digits start flashing in the time display section.
2.
Use the + key to adjust the hours and then press SET key to go to the minute setting.
3.
The minute will be flashing. Press the + key to just the minutes.
4.
Confirm with the SET key and enter the “Calendar Setting” or exit the setting mode by
pressing the CH key
CALENDAR SETTING
Year
69
Advertising