Lacava 13012 - Manual (Page 4)

LACAVA LLC 4
Installation Instructions/Instrucciones de Instalación
1. Position the rough-in into the wall at the appropriate
distance. Make sure the rough-in is leveled horizontally
and vertically.
2. Secure rough-in using the mounting holes on the
backplate.
3. Finish the wall around the plaster guards (Each hole
should be a circle with a max. diameter of 2 1/8”).
4. Remove the plaster guards.
5. Insert the spout into the tap body and fasten with
screws.
6. Slide escutcheon over the spout and the control
handle.
Min. distance for tile
wall
Min. distance for
plastered walls
Max. distance for
finished covering
2 1/8” Ø
H
C