Lacava 3610 - Manual (Page 4)

LACAVA LLC 4
Installation Instructions/Instrucciones de Instalación
1. Install supply lines into valve body. Tighten by hand.
DO NOT use wrench.
2. Install threaded rod into valve body.
2. Install one black foam washer so that it rests in the
indentation in the bottom of the mixer body. Then run
supply lines and threaded rod through the faucet hole in
the mounting surface and set faucet on surface.
3. Now from underneath the mounting surface install
black foam washer then steel washer around supply
lines and threaded rod.
4. Next install the half circle washer with threaded rod
running through the hole and thread nut on the end of
the rod.