System setup – LD Systems MEI 100 G2 User Manual
Page 11
11
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
DEUTSCH
ENGLISH
RECEIVER PROGRAMMING
Select a GROUP and/or CHANNEL:
Press the SET button (GROUP flashes). The desired frequency group is
selected using the arrow keys and (see Figure
5
). Press the SET
button again (CHANNEL flashes). The desired frequency group is selected
using the arrow keys and (see Figure
6
). Confirm with SET.
6
7
8
9
5
Battery indicator:
The battery status of the receiver is indicated in 5 levels (see Fig.
7
).
Stereo/mono mode indicator:
The receiver automatically detects whether a stereo or mono signal is
present and indicates the respective status on the LC display (see Figure
8
). Stereo/mono mode is configured on the transmitter.
LC display options:
Battery status, RF/audio level, stereo/mono mode, radio frequency (see
Figure
9
).
SYSTEM SETUp: