Legrand EFB610BP - Manual

Wiremold ®
Evolution ™ Series Floor Box – Abandonment
Installation Instructions
No: 1 010 827 – 0312
Catalog Number(s): EFB610BP
• Read all InstRuctIons befoRe begInnIng
Legrand/Wiremold electrical systems conform to and should be properly
grounded in compliance with requirements of the current National
Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire hazard if improperly
installed or used. Legrand/Wiremold electrical products may bear the mark
of a Nationally Recognized Testing Laboratory and should be installed in
conformance with current local and/or the National Electrical Code.
Country of Origin: Made in U.S.
For abandonment, remove cover assembly and install
steel plate using the four screws provided.
note: for flush mount abandonment, shims efb610-ts
can be used to make the top of the cover flush
with the finished floor.
Apply a bead of silicon caulk around the perimeter edge
of the plate to prevent any water or debris entry.