Legrand RC9APBK - Manual

RC9 Poke-Thru Abandonment Plate
Cat. No. RC9APBK
INSTALLATION INSTRUCTIONS
Installation Instruction No.: 1 001 997 R1 – Updated November 2002
Products Covered: RC9APBK
Remove Cover.
Remove Two Flange Screws. Attach Plate with Screws Provided.
Step 1
Step 2
Step 3
Completed Installation.
Walker ® electrical systems conform to and should be properly
grounded in compliance with requirements of the current National
Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire hazard
if improperly installed or used. Walker electrical products may
bear the mark as UL Listed and/or Classified and should be
installed in conformance with current local and/or the National
Electrical Code.
CAUTION: Abandonment plates are required to maintain the fire rating of the floor assembly whenever
a poke-thru fitting is abandoned or removed from the floor. The abandonment plate in these
instructions is shown in the UL fire Resistance Directory.
The Wiremold Company
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-6251
Canada:
850 Gartshore Street • Fergus, Ontario N1M 2W8
1-800-741-7957 • FAX 519-843-5980
1 000 776 R1 1202
© Copyright 2002 The Wiremold Company All Rights Reserved