Legrand Vista Series Add-On Plates - Manual

Vista ™ Series
Add-On Plates and Accessories
INSTALLATION INSTRUCTIONS
Wiremold Electrical Systems conform to and should be installed
and properly grounded in compliance with requirements of the
current National Electrical Code, Canadian Electrical Code or
codes administered by local authorities.
All electrical products may represent possible shock or fire
hazard if improperly installed or used. Wiremold electrical
products are cUL Listed, made for interior use only, and should
be installed in conformance with current local and/or the National
Electrical Code.
1
2
Receptacle & Lighting Plates require device
mounting straps. All other plates snap directly
into Vista Series Frame.
1. Install device mounting straps as shown.
2. Install lighting bracket plate into the frame
and mount Light fixture with supplied
hardware from lighting manufacturer.