Legrand APCB3 User Manual

Adorne

Advertising
background image

adorne

Under-Cabinet Lighting System –

Cord End Power Control Box

Catalog Number(s) • Numéro(s) de Catalogue • Número(s) de Catálogo: APCB3

Country of Origin: Made in China • Fabriqué en Chine • Hecho en China

The adorne

Under-Cabinet Lighting System can be powered with the

easy to use Cord End Power Control Box. For hard wired options, visit
adornemyhome.com/install.

Contents Include:

• Control Box
• Module Removal Tool
• Plug Protector/Cord Trim Guide

CAUTION

To prevent shock or electrocution, always

turn the power off at the service panel before

working with wiring. The adorne™ UNDER-

CABINET LIGHTING SYSTEM and its’

components may bear the mark of a Nationally

Recognized Testing Laboratory (NRTL) and

should be installed in conformance with current

local and national electrical codes.
Please read these instructions completely

before you begin. If you do not understand

these instructions or are unsure of your abilities,

seek the assistance of a qualified electrician.
Before attempting to install any of the hard

wired adorne™ UNDER-CABINET LIGHTING

SYSTEM POWER CONTROL BOXES make

sure that you:

• Understand basic wiring principles and

techniques

• Can interpret wiring diagrams

• Have circuit wiring experience

Do not apply power to the adorne™ UNDER-

CABINET SYSTEM until all components are

properly installed and all wiring is properly

terminated.
Do not attempt to dis-assemble or remove any

power feed component of the system other

than the CORD END POWER CONTROL BOX

without first turning off power to

the system.
Do not install the adorne™ UNDER-CABINET

LIGHTING SYSTEM directly above any direct

heat or open flame source.
The adorne™ UNDER-CABINET LIGHTING

SYSTEM is designed for indoor use only.

Do not install in a high moisture content

environment, as doing so may create an

electrical hazard or render the component

unusable.

Use only with Legrand adorne

Under-Cabinet

Lighting System.

ATTENTION

Pour éviter toute décharge ou électrocution,

éteignez toujours l'alimentation sur le panneau

de service avant de travailler sur le câblage. Le

SYSTÈME DE LUMINAIRES SOUS MEUBLE

adorne™ et ses composants peuvent être

estampillés « Nationally Recognized Testing

Laboratory » (NRTL) et doivent être installés

conformément aux réglementations électriques

locales et nationales.
Veuillez lire toutes ces instructions avant de

commencer. Si vous ne comprenez pas ces

instructions ou si vous êtes incertain de vos

aptitudes, n'hésitez pas à demander de l'aide

auprès d'un électricien qualifié.
Avant d'essayer d'installer l'un des BOÎTIERS

CÂBLÉS DE COMMANDES D'ALIMENTATION

DU SYSTÈME DE LUMINAIRES SOUS

MEUBLE adorne™, assurez-vous de :

• Bien comprendre les principes et techniques

de base du câblage

• Pouvoir interpréter les schémas de câblage

• Avoir l'habitude des câblages de circuit

N'alimentez pas le SYSTÈME SOUS MEUBLE

adorne™ tant que tous les composants ne sont

pas correctement installés et que le câblage

n'est pas terminé.
N'essayez pas de démonter ou de retirer l'un

des composants du système autre que le

BOÎTIER DE COMMANDES D'ALIMENTATION

D'EXTRÉMITÉ DE CORDON sans avoir au

préalable couper l'alimentation électrique du

système.
N'installez pas le SYSTÈME DE LUMINAIRES

SOUS MEUBLE adorne™ sous une source de

chaleur direct ou une source de flamme nue.
Le SYSTÈME DE LUMINAIRES SOUS MEUBLE

adorne™ est conçu pour une utilisation en

intérieur uniquement. Ne l'installez pas dans

un environnement très humide ; cela pourrait

provoquer un risque d'électrocution ou rendre

l'élément inutilisable.

À utiliser uniquement avec le système de

luminaires sous meuble adorne

de Legrand.

PRECAUCIÓN

Para evitar descargas o electrocución, siempre

desconecte la alimentación en el panel de

servicio antes de trabajar con cables. El

SISTEMA DE ILUMINACIÓN DEBAJO DEL

GABINETE adorne™ y sus componentes

pueden contener la marca del Laboratorio de

pruebas reconocido nacionalmente (NRTL,

por su sigla en inglés) y debe instalarse según

los códigos eléctricos locales y nacionales

actuales.
Lea completamente estas instrucciones

antes de comenzar. Si no entiende estas

instrucciones o no está seguro de sus

aptitudes, busque la ayuda de un electricista

calificado.
Antes de intentar instalar cualquiera de las

CAJAS DE CONTROL DE ALIMENTACIÓN DEL

SISTEMA DE ILUMINACIÓN DEBAJO DEL

GABINETE adorne™ energizadas, asegúrese

de:

• Entender las técnicas y los principios

básicos de cableado

• Interpretar los diagramas de cableado

• Tener experiencia en cableado

No aplique alimentación en el SISTEMA

DEBAJO DEL GABINETE adorne™ hasta que

todos los componentes estén correctamente

instalados y todo el cableado se haya

completado adecuadamente.
No intente desarmar o retirar ningún

componente de alimentación eléctrica del

sistema que no sea la CAJA DE CONTROL DE

ALIMENTACIÓN DEL EXTREMO DEL CABLE

sin antes apagar la alimentación del sistema.
No instale el SISTEMA DE ILUMINACIÓN

DEBAJO DEL GABINETE adorne™

directamente encima de cualquier fuente de

calor directo o de llama abierta.
El SISTEMA DE ILUMINACIÓN DEBAJO DEL

GABINETE adorne™ está diseñado para

usar solo en interiores. No lo instale en un

ambiente con alto contenido de humedad, ya

que puede crear un riesgo eléctrico o tornar al

componente inutilizable.

Utilizar únicamente con el sistema de

iluminación debajo del gabinete adorne

TM

de

Legrand.

Le système de luminaires sous meuble adorne

peut facilement

être alimenté pour utiliser un boîtier de commandes d'alimentation
d'extrémité de cordon. Dans le cas d'options câblées, consultez la
page adornemyhome.com/install.

Cela comprend :

• Un boîtier de commandes
• Outil de dépose du module
• Une protection de prise/guide d'habillage

de cordon

El sistema de iluminación debajo del gabinete adorne

puede

alimentarse con la sencilla caja de control de alimentación del
extremo del cable. Para las opciones con alto nivel de cables, visite
adornemyhome.com/install.

El contenido incluye:

• Caja de control
• Herramienta de extracción del módulo
• Protector del tapón/Guía de corte del cable

No: 1010773R1 – 06/13

Installation Instructions • Notice d’Installation• Instrucciones de Instalación

Advertising