Legrand 525 Series Service Fittings - Manual

525 Series
Power Service Fittings
I N S T A L L A T I O N I N S T R U C T I O N S
Installation Instruction No.: 1 003 339 R1 – December 2003
Walker ® electrical systems conform to and should be properly
grounded in compliance with requirements of the current National
Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire
hazard if improperly installed or used. Walker electrical products
may bear the mark as UL Listed and/or Classified and should
be installed in conformance with current local and/or the National
Electrical Code.
IMPORTANT: Please read all instructions
before beginning.
STEP 1 STEP 2
1 1/4" Opening
Locking Nipple
Gasket
Adapter
Screw Adapter
into Fitting
Housing
STEP 5 STEP 6
STEP 3 STEP 4
Base Plate
1" Opening
The Wiremold Company
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-6251
Canada:
850 Gartshore Street • Fergus, Ontario N1M 2W8
1-800-741-7957 • FAX 519-843-5980
1 003 339 R1 1203 © Copyright 2003 The Wiremold Company All Rights Reserved
Faceplates
NOTE: Trim carpet or tile
flush with perimeter
of preset or afterset.
NOTE: If fitting is placed on carpeted floor, remove
exposed carpet in opening area.