Legrand AL3356-ACTLPB Medium Aluminum Prewired Raceway Mounting Straps User Manual
Mounting straps & cover kit
Wiremold / Legrand electrical systems conform to and should be
properly grounded in compliance with requirements of the current
National Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire
hazard if improperly installed or used. Wiremold / Legrand electrical
products may bear the mark as UL Listed and/or Classified and should
be installed in conformance with current local and/or the National
Electrical Code.
Products Covered: AL3000, AL3300
AL3000/AL3300
Mounting Straps & Cover Kit
I N S T A L L A T I O N I N S T R U C T I O N S
Installation Instruction No.: 1 007 588 – February 2008
IMPORTANT: Please read all instructions
before beginning.
Step 3
Install device mounting straps (2 for each
device) at those locations.
a. Engage device straps to side walls of race-
way base.
b. Tuck flanges of strap underneath the lower
ridge of the raceway base one leg at a time.
Step 1 Install raceway base.
Step 2 Mark locations for devices.
NEW INSTALLATION
Step 5
Wire all devices and mount to straps.
Step 4 Position straps at appropriate mounting
distances for the device.