Legrand Access 5000 Large Capacity Raceway Entrance End Fitting - Manual

5010A Entrance End Fitting
Installation Instructions
The Entrance End Fitting is used to provide an end feed to Access™ 5000 Raceway with 1/2" or 3/4"
conduit. Installation should be as shown with side walls of the Fitting Base and Raceway Base aligned.
Access 5000 Raceway installed at baseboard level should be spaced a minimum of 1/8" above the floor
level. This will facilitate the assembly/disassembly of the End Fitting Cover.
Fitting Base
Raceway Base
Raceway Cover
Fitting Cover
©1995 The Wiremold Company 40932 695
The Wiremold Company
60 Woodlawn Street
West Hartford CT 06133-2500