Legrand DS4000 Downward Facing Activation Plates User Manual
Page 3
Shroud Configurations:
Cover Installation:
Bypass with Low Profile Shroud. Recommended for
Receptacles and shallow Communication Devices.
Bypass with Standard Shroud. Recommended for
most Communication Devices.
Note:
Downward Facing Device Plates containing electrical receptacles should be
installed in compliance with National and Local Electrical Codes. Check with
your local Authority Having Jurisdiction (AHJ) regarding approval of Downward
Facing Electrical Devices before installation.
Note:
Low Voltage Devices, such as communication jacks may be placed in an
upward position.
Configuration A
Configuration B
Step 1. With Raceway Covers installed
Step 2. Snap on Cover and secure with Screw to
complete installation.
5" to 5 1/2" [127mm to 140mm]
gap between Raceway Covers
Secure Cover in place with Screw.