ATI Technologies RADEON 8500LE - Manual (Page 11)

7
To enable Extended Desktop Mode, refer to the
section
Enabling Extended Desktop Mode .
1 Access the Windows
®
Control Panel. Double-
click Display.
2 Click on the Settings tab and then the
Advanced... button.
3 Click on the ATI Displays tab.
The ATI Displays tab shows you the display(s) that
are active. The Primary display has the
button
depressed. To change the display assignment, you
can click the Primary display’s
button or you can
click the button of the other display device.
In Windows
®
2000 and Windows
®
NT4.0, clicking
on the button will reassign the Primary and
Secondary monitors. Clicking on the button
creates a clone or mirror image of the Primary
display onto the Secondary display. Clicking on the
button extends your desktop to a Secondary
display located to the right of the Primary display.
Clicking on the
button extends your desktop to a
Secondary display located below the Primary
display.
4 Click OK or Apply to save the changes.